| Contact UsProfessional plastic dehumidifying dryer!Main model:Plastic Dehumidifier | Hopper dryer | PET crystal Dryer | Honeycomb dryer | Three-in-one dehumidifying dryer
Hengju Dehumidifying dryer Machinery EquipmentFocus on the development and production of dehumidification dryer equipment for many years
  • Central conveying system
  • Air Cooled Chiller
  • Automatic metering system
  • machine hand
  • Mixer Machine
  • Dehumidifying dryer
  • Mold temperature machine
  • Suction machine
  • gravimetric blender
  • Crusher
  • Energy-saving three-in-one dehumidification drying system is more simplified, fully reducing the power consumption of the system, high efficiency, ultra-energy saving up to 60%, And it is small in size and does not occupy space, especially suitable for dust-free workshops. No need to connect to cooling water, easy to move. Simple structure, machine reliability high. The whole machine adopts microcomputer control, simple operation, stable performance, longer expected, dry air volume 30-200m³/hr.
    box type plastic resin dryer Box type plastic resin dryer The air circulation system of the hot air circulation oven adopts a fan circulating air supply method, and the air circulation is uniform and efficient. The air source is driven by a circulating air motor (using a non-contact switch) to drive the wind wheel through the heater to send out the hot air, and then to the oven chamber through the air duct, and then suck the used air into the air duct to become the air source for recirculation. Heating use. Ensure the uniformity of indoor temperature. When the temperature value swings due to the opening and closing of the door, the air circulation system quickly restores the operating state until it reaches the temperature value set by the oven.
    Plastic crystallization Dryer Plastic crystallization Dryer 1. It can be equipped with a dehumidifier to directly perform dehumidification operations; 2. Optional vacuum hopper, suction machine, magnetic base, suction box for conveying operations; 3. Optional screw feeder, which can stably and uniformly convey uncrystallized granular raw materials and PET flakes. In industrial production, many engineering raw materials need to use a crystal dryer for drying. It is important to choose a high-quality crystal dryer.
    Hopper desiccant dryer,Hopper dryer 1. Use uniformly dispersed high-performance hot air diffusion device to keep the plastic drying temperature uniform and improve drying efficiency. 2. The special curved design of the hot air tube can avoid the accumulation of dust on the bottom of the electric heating tube to cause burning. 3. The proportional deviation indicating temperature controller is used to accurately control the temperature. 4. With overheating protection device, it can reduce accidents caused by man-made or mechanical failure. 5. The appearance is novel and bright.
    standard plastic dryer resin drye, Standard Dehumidifying Dryer 1. This series adopts the microcomputer P. I. D. temperature control system to control the temperature accurately; 2. Adopting Nigas brand full molecular sieve honeycomb dehumidification runner imported from Japan, the dehumidification effect is better and more stable; 3. Enlarged and equipped with detachable cooler, easy maintenance and lower return air temperature; 4. High-density return air filter to ensure that the honeycomb runner is not polluted by raw material dust; 5. Double-layer insulation and downward blowing stainless steel dryer; 6. The feeding system is equipped with an evacuation shutoff valve (quickly disassembled) to ensure that there is no residual material in the pipe; 7. Hot material conveying can be equipped with a closed conveying device of hot air loop, which can effectively avoid raw material pollution and moisture resurgence; 8. Optional optical grade hopper dryer to suit the production of optical grade and food grade products; 9. The filter is designed with a transparent window, which can observe the use of the filter and clean or replace it regularly; 10. The snap-on sealing plate design makes later maintenance and repair more convenient; 11. The dew point of the air after dehumidification can be as low as -40°C.
    The PET pre-crystallization dryer mainly relies on the vibration exciter from the bottom of the container to generate mechanical excitation force, so that the container generates periodic vibration force. Because the inner bottom of the PET pre-crystallization dryer container is a cylindrical shape, the amplitude of each point is different, so that the material in the PET pre-crystallization dryer container revolves around the center axis of the container, and then rolls around the center of the PET pre-crystallization dryer cylinder, forming a ring Spiral movement to achieve a dry state. The dried material is in contact with the inner wall of the jacket-heated container to transfer heat and increase temperature. After reaching the vaporization point, the moisture is vaporized and discharged under vacuum, so that the material can be quickly dehydrated and dried.
    Honeycomb dehumidifier dryer are mainly suitable for underground engineering, national defense engineering, archives, libraries, factory workshops, warehouses, computer rooms, and environments that require temperature and humidity. The temperature-adjustable dehumidifier can automatically adjust temperature, cool down and dehumidify. The temperature-adjustable dehumidifier integrates dehumidification and refrigeration functions with adjustable cooling capacity, which is especially suitable for dehumidifying places in high temperature and high humidity environments with large thermal load changes. The unit automatically runs in the cold air dehumidification mode, and the heat generated by the unit is dissipated into the outdoor atmosphere through the outdoor unit; in the low temperature, cold and humid environment, the unit automatically runs in dehumidification conditions. The cooling dehumidifier has a refrigeration function while reducing humidity, but the refrigeration function is not adjustable. It is suitable for dehumidification occasions with large heat load and no relative humidity requirements.
    昆山恒诚荣机械设备有限公司 专业生产塑胶原料干燥,除湿,输送,在多年的努力下,先后开发了注塑供料,电缆...
    Seiko quality.remarkable resultsA complete scientific and complete production process from design, manufacturing to product inspection
    Dehumidifying dryer actual production and sales enterprise certificate, and passed the international ISO: 9001: 2005 enterprise certification
    Production LicenseThis is a legal certificate that enterprises must have in the production process. Only legitimate manufacturers can have certificates!
    Have all dehumidifying dryer program software certificates
    Software copyrightThis is a dehumidifying dryer program software certificate with all property rights independently developed by Hengju
    Have all patent certificates of dehumidification dryer technology
    patent certificate This is the patent certificate of the dehumidifying dryer with all intellectual property rights independently developed by Hengju
    Qualification and quality certificate for export of dehumidification dryer technology
    Global certificationThis is a quality system certificate (energy saving, environmental protection) certified by a global authority
    Hengju Machinery·Application CaseContinuously provide customers with personalized machines corresponding to different products and requirements
    Plastic Machinery Manufacturer
  •    Dongguan Hengju Machinery Equipment Co., Ltd. is a high-tech enterprise with multiple patent technology certificates! The company is located in "Global Manufacturing Base" "Dongguan City, Guangdong Province"! Have independent copyright technology and manufacturer! The purpose of the enterprise is the spirit of excellence! Products are sold all over the world! And the company can provide the whole plant design plan! Mainly manufacture plastic equipment: centralized feeding system, manipulator, plastic desiccant dryer, mixer, powder suction machine, cooler,weighing and metering system, color master and other equipment.more+

  • 新闻中心 新闻中心 news
  • MORE+
  • 行业资讯 行业资讯 Industry
  • MORE+
  • 2020
    03-
    03
    1、主要结构:粉碎机主要由投料斗、粉碎室、刀架、筛网板、下料斗、电机等构成。 2、工作原理:被粉碎的...
    2020
    03-
    03
    冷热一体机能够实现生产加工过程中的制冷和制热功能,满足不同场合的温度控制需求,而且一体机的不同制作标...
    2020
    03-
    03
    冷热一体机市场占有率将会有更大的跃进   冷热一体机是针对橡胶生产设备控温特点(第一次升温到达制品所需...
    2020
    03-
    03
    不用就亏了,模具水路清洗机能省电30%左右   模具水路清洗机导热油电加热器的优点是控温范围大,热确定好...
    2020
    03-
    03
    冷热一体机设计合理,换热效果良好,静电喷塑外壳欧化设计,美观大方,外表板采用快捷拆装形式,方便使用和...
    2020
    03-
    03
    料斗干燥机采用比例式偏差指示温控器,可控制温度。 料斗干燥机是以发热管加热所嘛进的空气,循环流经塑胶...
    2020
    03-
    03
    除湿干燥机的设计系统较普通的除湿干燥机更为简化,不仅减少系统之耗电量,功效高,超节能省电。 除湿干燥...
    2020
    03-
    03
    料斗干燥机能够实现多路控制,还能够随环境气候改变,而灵活设置。 因为改变一下设定参数即可,既方便又快...
    2020
    03-
    03
    除湿干燥机除湿与再生连续循环工作,确保露点温度稳定,在-40度以下露点稳定成一条直线,不产生污染确保塑胶品...
    2020
    03-
    03
    冷热一体机采用的电器控制系统与制冷系统中,继电器、热保护器、膨胀阀、冷热水机,冷热一体机压力控制器、...

    常见问题 / FAQ  more

    中央供料系统是为注塑车间的塑料产品生产而设计的,实现了不间断无人化连续成型作业。 中央供料/系统料斗...
    料斗干燥机是透明视窗型磁铁底座。 那它是如何来操作的呢?首先在料斗中加入适当需要烘烤的原料。再将加热...
    除湿干燥机上端装有数块夹层加热板,内通蒸汽、热水或冷却水。箱体上端装有的真空管接口与获得真空装置相通...